TM 9-2320-392-10-1
PREPARATION FOR INTERNAL AIR TRANSPORT,
0059 00
HIGHWAY, OR RAIL SHIPMENT Continued
DECOMPRESSING SUSPENSION - Continued
15. Position SUSPENSION knob (15) to LOWER.
NOTE
Use back-up hydraulic pump (WP 0044 00) if pressing PUMP knob does not
accomplish step (16).
16. Press PUMP knob (17) until cylinder rod (28) is fully retracted and two safety pins
(13) can be inserted in compression cylinder (14).
NOTE
Left and right side suspension compression plates are installed the same
way. Right side suspension compression plate shown.
17. Install two safety pins (13) in compression cylinder (14).
18. Install suspension compression plate (12) on stud (11).
19. Install retaining pin (10) in stud (11).
20. Perform step (17) through (19) on left side of vehicle.
21. Lower cab (WP 0021 00).
0059 00-17
