TM 9-2320-392-10-1
M1078/M1078A1 AND M1083/M1083A1 SERIES
0042 00
TOWING CONNECTION/DISCONNECTION - Continued
REAR CONNECTION - Continued
CAUTION
Stinger cam lock is normally locked in second rectangular hole on stinger
when towing M1078/M1078A1 and M1083/M1083A1. It may be necessary to
lock stinger cam lock in third rectangular hole on stinger if components
mounted on rear of M1078/M1078A1 and M1083/M1083A1 interfere with
movement of crossbar. Lock stinger cam lock in hole which will allow
crossbar to rotate freely. Failure to comply may result in damage to
equipment.
It may be necessary to start with holes 4 or 5 on stinger when recovering a
vehicle on uneven ground. Once level ground is reached, lock stinger in
second hole. Failure to comply may cause damage to equipment.
15. Place STINGER lever (15) to IN position to retract stinger (16) until stinger cam lock
holes (17) are aligned.
16. Lock stinger cam lock (8).
0042 00-29