TM 9-2320-392-10-1
M35 SERIES TOWING
CONNECTION/DISCONNECTION - Continued
FRONT CONNECTION - Continued
NOTE
Perform step 3 if an assistant is not present to assist with vehicle connection.
Operation from WRECKER CONTROL PANEL shown.
3.
Connect WRECKER REMOTE CONTROL (WP 0037 00).
4.
Remove two linchpins (5) and large pins (6) from two lift tools (7).
5.
Remove two linchpins (8) and small pins (9) from two lift tools (7).
NOTE
Top bumper lift tools are installed with small pin holes facing toward rear of
crossbar.
Left and right side top bumper lift tools are installed on lift tools the same
way. Left side shown.
6.
Install two top bumper lift tools (1) on two lift tools (7) with large pins (6) and
linchpins (5).
7.
Install small pins (9) and linchpins (8) in two top bumper lift tools (1).
0040 00-2
