TM 9-2320-392-10-1
M998 SERIES TOWING
0038 00
CONNECTION/DISCONNECTION - Continued
FRONT CONNECTION - Continued
9.
Remove two shackles from M998 tow eyes (TM 9-2320-280-10).
WARNING
Goggles must be worn when operating WRECKER CONTROL PANEL.
Blowing dust and debris may become airborne while engine is
running. Failure to comply may result in injury to personnel.
10. Place UNDERLIFT lever (11) in UP position to raise crossbar (12) until two top
bumper lift tools (1) are aligned with M998 tow eyes (13).
11. Place STINGER lever (14) in OUT position to extend stinger (15) until two top bumper
lift tools (1) are aligned with M998 tow eyes (13).
NOTE
Left and right side top bumper lift tools are installed on M998 tow eyes the
same way. Left side shown.
Top bumper lift tools are attached to M998 tow eyes with bolts, nuts and
cotter pins removed with M998 shackles.
12. Install two top bumper lift tools (1) on two M998 tow eyes (13) with two bolts (16),
nuts (17), and cotter pins (18).
0038 00-3
