TM 9-2320-392-10-1
M998 SERIES TOWING
0038 00
CONNECTION/DISCONNECTION - Continued
FRONT CONNECTION - Continued
2.
Prepare underlift assembly for operation (WP 0037 00).
3.
Connect WRECKER REMOTE CONTROL (WP 0037 00).
4.
Remove two linchpins (5) and large pins (6) from lift tools (7).
5.
Remove two linchpins (8) and small pins (9) from lift tools (7).
NOTE
Top bumper lift tools are installed with small pin hole facing toward rear of
crossbar.
Left and right side top lift tools are installed the same way.
Right side
shown.
6.
Install two top bumper lift tools (1) on lift tools (7) with large pins (6) and linchpins
(5).
7.
Install small pins (9) and linchpins (8) in two top bumper lift tools (1).
8.
Unlock stinger cam lock (10).
0038 00-2
