TM 9-2320-392-10-1
M1089A1 FLAT TOWING - Continued
0036 00
TOWBAR CONNECTION
WARNING
Towbar weighs approximately 100 lbs (45 kgs) and requires two or
more personnel to carry. Failure to comply may result in injury to
personnel.
NOTE
Steps 1 and 2 require the aid of an assistant.
1.
Remove towbar (7) and two adapters (8) from tool box.
NOTE
Left and right side towbar adapters are installed the same way. One
shown.
2.
Remove linchpin (9) and pin (10) from towbar clevis (11).
3.
Install towbar adapter (8) in towbar clevis (11) with pin (10) and linchpin (9).
4.
Perform step on remaining towbar clevis.
5.
Position rear of M1089A1 near front of disabled vehicle with towbar (7) between
vehicles.
6.
Remove linchpin (12) from pin (13).
7.
Remove pin (13) from towbar (7).
8.
Separate towbar (7) at pivot point (14).
0036 00-4
