TM 9-2320-392-10-1
30K WINCH OPERATION - Continued
0035 00
30K WINCH OPERATION WITH LOAD - Continued
b.
If cable (10) is too tight and is above tight mark on tension indicator, stop pay
out and perform steps 17 through 19.
c.
If cable (10) passes between loose and tight marks on tension indicator,
proceed to step 21.
CAUTION
Power fairlead tension bolt must not be overtightened. Overtightening power
fairlead tension bolt will put strain on cable, winch motor, and power
fairlead. Failure to comply may result in damage to equipment.
16. Turn tension screw (11) to the right one complete turn.
17. Turn tension screw (11) to the left one complete turn.
0035 00-7
