TM 9-2320-392-10-1
30K WINCH OPERATION - Continued
0035 00
30K WINCH OPERATION WITH LOAD - Continued
2.
Position vehicle so the pull is as straight as possible and the 30K winch pull capacity
is adequate for equipment to be recovered. Refer to FM 20-22 and Table 1.
Table 1. 30K Winch Pull Capacity
Cable
Maximum Line Pull
Maximum Line Pull
Layer
(cable reeled in at
(cable reeled in at
high speed)
low speed)
Bottom Layer
15,000 lbs (66,720 N)
30,000 lbs (133,440 N)
(five wraps
minimum)
2nd Layer
12,720 lbs (56,579 N)
25,440 lbs (113,157 N)
3rd Layer
11,045 lbs (49,128 N)
22,090 lbs (98,256 N)
4th Layer
9,758 lbs (43,404 N)
19,515 lbs (86,803 N)
5th Layer
8,740 lbs (38,876 N)
17,480 lbs (77,751 N)
Top Layer
7,915 lbs (35,206 N)
15,830 lbs (70,412 N)
3.
Press N (Neutral) button (1) on WTEC III TPSS (2).
4.
Pull out SYSTEM PARK control (3).
5.
Position PTO switch (4) to on.
0035 00-2
