TM 9-2320-392-10-1
DUMP TRUCK OPERATION - Continued
0031 00
LOWERING CAB PROTECTOR
NOTE
This task applies to both sides of cab protector. Left side shown.
1.
Remove safety pin (5) and turn bolt (6) from cab protector (3).
WARNING
Cab protector is spring loaded and weighs approximately 180 lbs
(82 kgs). Keep pressure on cab protector when lowering and
when installing pins. Failure to comply may result in injury to
personnel.
NOTE
Step (2) requires the aid of an assistant.
2.
Lower cab protector (3) into dump body (4).
3.
Remove safety pin (1) and hitch pin (2) from cab protector (3).
4.
Install hitch pin (2) through cab protector (3) and dump body (4).
5.
Install safety pin (1) in hitch pin (2).
0031 00-7
