TM 9-2320-392-10-1
DUMP TRUCK OPERATION - Continued
0031 00
RAISING CAB PROTECTOR
WARNING
Cab protector is spring loaded and weighs approximately 180 lbs
(82 kgs). Hold cab protector down before removing pins. Slowly
allow cab protector to raise to vertical position after pins are
removed. Failure to comply may result in injury to personnel.
NOTE
This task applies to both sides of cab protector. Left side shown.
1.
Remove safety pin (1) from hitch pin (2).
2.
Remove hitch pin (2) from cab protector (3) and dump body (4).
3.
Install hitch pin (2) and safety pin (1) in cab protector (3).
0031 00-5
