TM 9-2320-392-10-1
LIGHT MATERIAL HANDLING CRANE (LMHC)
0023 00
OPERATION- Continued
RESET CIRCUIT BREAKER
NOTE
Circuit breaker located inside circuit breaker box will occasionally trip due to
sudden high amperage inputs. If circuit breaker trips more than four times
during a mission, notify Field Maintenance.
1.
Loosen, but do not remove, three screws (1) securing box cover (2).
2.
Rotate three clamps (3) and open box cover (2).
CAUTION
Use care when positioning circuit breaker switch so as not to upset mounting
lugs. Failure to comply may result in damage to equipment.
3.
Position circuit breaker switch (4) to ON.
4.
Close box cover (2) and rotate three clamps (3) back to original position.
5.
Tighten three screws (1).
0023 00-3