TM 9-2320-366-20-5
This task covers:
a. Installation
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Tools and Special Tools
Engine shut down (TM 9-2320-366-10-1)
Tool Kit, Genl Mech (Item 46, Appendix C)
Batteries discounted (para 7-57)
Wrench, Torque (0-200 Lb-in) (Item 59, Appendix C)
Power distribution panel removed (para 7-11
Wrench Set, Socket (Item 51, Appendix C)
WTEC II, para 7-13 WTEC III)
Kick panel removed (para 16-3)
Materials/Parts
RH seat removed (para 16-15)
Plastic Cable Ties (Item 69, Appendix D)
Sealant (Item 55.1.1 Appendix D)
Personnel Required
(2)
a. Installation.
(1) Position drivers storage box (1) in cab.
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(2) Apply sealant to threads of six screws (2).
(3) Position six washers (3) and screws (2) in drivers
storage box (1).
(4) Tighten six screws (2) to 70-85 lb-in. (8-10 Nm).
(5) Snap webbing (4).
Change 2
