TM 9-2320-366-20-5
This task covers:
a. Installation
c. Follow-On Maintenance
b. Removal
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Pin, Cotter (20) (Item 277, Appendix G)
Cargo bed side panels and stakes removed (TM
Lockwasher (4) (Item 90.1, Appendix G)
9-2320-366-10-1).
Personnel Required
(2)
Tools and Special Tools
Sling, Cargo (Item 31, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque 0-175 lb-ft (Item 58, Appendix C)
WARNING
Ensure vehicle is on level ground prior to
installation or removal of tank and pump
unit. Failure to comply may result in
serious injury or death to personnel or
damage to equipment.
a. Installation.
NOTE
Four middle turnbuckles are assembled the
same way. One middle turnbuckle shown.
(1) Position clamp half (1) in shackle (2).
(2) Position clamp half (3) in shock mount (4).
(3) Install clamp half (1) in clamp half (3) with spring collar
(5) and pin (6).
20-467
