TM 9-2320-366-20-5
This task covers:
a. Installation
c. Follow-On Maintenance
b. Removal
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Wrench, Torque (Item 58, Appendix C)
Cargo bed side panels and stakes removed (TM
9-2320-366-10-1).
Materials/Parts
Pin, Cotter (20) (Item 277, Appendix G)
Tools and Special Tools
Sling, Cargo (Item 31, Appendix C)
Personnel Required
Tool Kit, Genl Mech (Item 46, Appendix C)
(2)
WARNING
Ensure vehicle is on level ground prior to
installation or removal of tank and pump
unit. Failure to comply may result in
serious injury or death to personnel or
damage to equipment.
a. Installation.
NOTE
Four middle chains are assembled the same
way. One middle chain shown.
(1) Position clamp half (1) in shackle (2).
(2) Position clamp half (3) in chain (4).
(3) Install clamp half (1) in clamp half (3) with spring collar
(5) and pin (6).
