TM 9-2320-366-20-5
This task covers:
a. Installation
c. Follow-On Maintenance
b. Removal
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)
Cargo bed side panels and stakes removed (TM
Wrench Set, Socket (Item 50, Appendix C)
9-2320-366-10-1).
Materials/Parts
Pin, Cotter (20) (Item 277, Appendix G)
Tools and Special Tools
Sling, Cargo (Item 31, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Personnel Required
(2)
WARNING
Ensure vehicle is on level ground prior to
installation or removal of collapsible
drums. Failure to comply may result in
serious injury or death to personnel or
damage to equipment.
a. Installation.
NOTE
Rear middle chains are assembled the same
way. One rear middle chain shown.
Steps (1) through (6) requires 39 link chain.
(1) Position clamp half (1) in hook (2).
(2) Position clamp half (3) in chain (4).
(3) Install clamp half (1) in clamp half (3) with spring collar
(5) and pin (6).
