TM 9-2320-366-20-5
b. Installation.
(1) Install 90-degree fitting (1) in hydraulic latch (2).
(2) Position hydraulic latch (2) on cab support assembly
(3) with four screws (4), washers (5), and self-locking
nuts (6).
(3) Connect hydraulic hose (7) to 90-degree fitting (1).
c. Adjustment.
(1) Loosen four nuts (1) on hydraulic latch (2).
NOTE
Perform step (2) and note position of cab
latching hook assembly when it is near
hydraulic latch.
(2) Lower cab (TM 9-2320-366-10-1).
(3) Raise cab (TM 9-2320-366-10-1).
(4) Position hydraulic latch (2) to engage cab latching
hook assembly (3).
(5) Tighten four self-locking nuts (1) to 34-44 lb-ft (46-60
Nm).
(6) Lower cab (TM 9-2320-366-10-1).
(7) Check cab latching hook assembly (3) for proper
operation.
(8) Perform steps (1) through (7), as required.
Change 1
19-33
