TM 9-2320-366-20-5
(44) Remove two grommets (55) from personnel heater (17).
(45) Loosen clamps (56 and 57) on duct (58).
(46) Disconnect duct (58) from personnel heater (17).
(47) Remove clamps (56 and 57) from duct (58).
(48) Remove grommet (59) from personnel heater (17).
NOTE
Perform steps (49) and (50) on vehicles not
equipped with auxiliary panel.
(49) Remove plug (60) from personnel heater (17).
(50) Remove decal (61) from personnel heater (17). Discard
decal.
(51) Remove seven rivets (62) and cover (63) from personnel
heater (17).
(52) Remove push nut (64) from vent door shaft (65).
(53) Remove screw (66) and cable clamp (67) from bracket
(68).
(54) Remove VENT control cable (9) from vent door shaft
(65).
(55) Remove VENT control cable (9) from personnel heater
(17).
(56) Remove cable clamp (67) from VENT control cable (9).
18-41