TM 9-2320-366-20-5
(4) Drive spring pin (7) through bracket (6) and into straight
shaft (3) as far as possible.
(5) Remove straight shaft (3) and roller fairlead (8) from
bracket (6).
(6) Remove spring pin (7) from straight shaft (3). Discard
spring pin.
(7) Remove two lubrication fittings (9) from straight shafts
(10 and 11).
(8) Drive spring pin (12) through bracket (6) and into straight
shaft (10) as far as possible.
(9) Remove straight shaft (10) and roller fairlead (13) from
bracket (6).
17-93
