TM 9-2320-366-20-4
Assemble the M1089 30K winch test adapter according to the following steps. Refer to the following parts list and
Part Number
Material Description
National Stock
Qty
Number
4-4-4 100401BA
Tee, Tube
1
4-6 100102BA
Adapter, Straight, Pipe to Tube
1
207P-4
Coupling, Pipe
1
NB-4-035
Tubing, Nonmetallic
4 in.
MIL-T-27730
Tape, Antiseizing
1 roll
a.
All dimensions are in inches (millimeters).
b.
Cut two pieces of nonmetallic tubing (1 and 2) to 2.0 in. (50.8 mm) long.
c.
Remove three nuts (3), sleeves (4), and ferrules (5) from tube tee (6).
d.
Install two nuts (3), sleeves (4), and ferrules (5) on nonmetallic tubing (1).
e.
Install nonmetallic tubing (1) on tube tee (6).
f.
Remove nut (7), sleeve (8), and ferrule (9) from straight adapter (10).
g.
Install two nuts (3 and 7), sleeves (4 and 8), and ferrules (5 and 9) on nonmetallic tubing (2).
h.
Install nonmetallic tubing (2) on tube tee (6).
i.
Install nut (9) on straight adapter (10).
j.
Apply one wrap of antiseizing tape to threads of straight adapter (10).
k.
Install pipe coupling (11) on straight adapter (10).
Change 1
