TM 9-2320-366-20-4
16-6. M1093/M1094 DOOR REPAIR/ADJUSTMENT (CONT)
(9) Position latch assembly (9) and release assembly (10)
on door (5) with three screws (11).
(10) Tighten three screws (11) to 70-85 lb-in. (8-10 Nm).
(11) Install actuator control rod (12) and seal (13) on actuator
assembly (14).
(12) Insert actuator assembly (14) in door (5).
(13) Attach upper end of actuator control rod (12) to release
assembly (10).
(14) Position two washers (15) and screws (16) in actuator
assembly (14).
(15) Tighten two screws (16) to 49-60 lb-in. (5-7 Nm).
16-48
Change 1
