TM 9-2320-366-20-4
16-5. DOOR REPAIR/ADJUSTMENT (ALL MODELS EXCEPT M1093/M1094) (CONT)
(15) Position mirror assembly (19) on door (7) with four
screws (20).
(16) Tighten four screws (20) to 84-96 lb-in. (9-11 Nm).
g. Door Adjustment.
NOTE
Steps (1) and (2) require the aid of an assistant.
Loosen door hinge screws only enough to allow
small adjusting movements of door.
(1) Support door (1) and loosen six screws (2) on bottom
hinge (3) and top hinge (4).
(2) Adjust door (1) so that gap between door (1) and cab is
approximately equal all around.
(3) Open, close, and open door (1) to ensure correct
operation.
(4) Tighten six screws (2) on top hinge (4) and bottom hinge
(3) to 22-26 lb-ft (30-35 Nm).
16-34
