TM 9-2320-366-20-4
(10) Remove two screws (19) and door arrestor assembly
(20) from bottom of door (3).
(11) Remove screw (21), two spring washers (22), door
arrestor assembly (20), and washer (23) from cab.
(12) Remove wiring harness (24) from door (3) by pulling
through access hole in forward edge of door (3).
(13) Remove four clip nuts (25) from door (3).
NOTE
Steps (14) through (16) require the aid of an
assistant.
(14) Lift door (3) enough to take weight off hinges (26 and
27).
(15) Remove six screws (28) and washers (29) from hinges
(26 and 27).
(16) Remove door (3) from cab.
16-31
