TM 9-2320-366-20-4
(11) Route rear lights cable (12) through left frame rail (13).
(12) Position two clamps (13) on rear lights cable assembly
(12).
(13) Position two clamps (13) on left taillight carrier (2) with
two screws (14) and self-locking nuts (15).
(14) Tighten two self-locking nuts (15) to 84-108 lb-in. (10-12
Nm).
c. Right Taillight Carrier Removal.
NOTE
Perform steps (1) through (3) on all vehicles
not equipped with 15K Self-Recovery Winch
(SRW).
(1) Remove two self-locking nuts (1), clamps (2) and screws
(3) from right taillight carrier (4). Discard self-locking
nuts.
(2) Remove clamps (2) from rear lights cable assembly (5).
Change 1
14-35