TM 9-2320-366-20-4
NOTE
Perform steps (7) through (9) on M1090 and
M1094 vehicles.
(7) Remove self-locking nut (7) and screw (8) from brace
(9). Discard self-locking nut.
NOTE
Step (8) requires the aid of an assistant.
(8) Remove four self-locking nuts (10), screws (11) and left
taillight carrier (4) from bracket (12). Discard self-locking
nuts.
(9) Remove two self-locking nuts (13), bolts (14), and brace
(9) from left taillight carrier (4). Discard self-locking nuts.
b. Installation.
NOTE
Perform steps (1) through (5) on M1090 and
M1094 vehicles.
(1) Position brace (1) on left taillight carrier (2) with two bolts
(3) and self-locking nuts (4).
(2) Tighten two self-locking nuts (4) to 47 lb-ft (64 Nm).
Change 1
14-33
