TM 9-2320-366-20-4
This task covers:
a. 30K Winch Frame Catwalk Removal
g.
Control Panel/Hand Rail Catwalk Removal
b. 30K Winch Frame Catwalk Installation
h.
Control Panel/Hand Rail Catwalk Installation
c. Center Catwalk Removal
i.
Right Catwalk Removal
d. Center Catwalk Installation
j.
Right Catwalk Installation
e. Left Catwalk Removal
f. Left Catwalk Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts (Cont)
Engine shut down (TM 9-2320-366-10-1).
Nut, Self-Locking (50) (Item 146, Appendix G)
Nut, Self-Locking (2) (Item 149, Appendix G)
Nut, Self-Locking (2) (Item 148, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Lockwasher (2) (Item 96, Appendix G)
Wrench, Torque, 0-175 lb ft (Item 58, Appendix C)
Lockwasher (8) (Item 100, Appendix G)
Goggles, Industrial (Item 15, Appendix C)
Lockwasher (6) (Item 102, Appendix G)
Pin, Cotter (2) (Item 235, Appendix G)
Materials/Parts
Sealing Compound (Item 57, Appendix D)
Personnel Required
Nut, Self-Locking (2) (Item 147, Appendix G)
(2)
a. 30K Winch Frame Catwalk Removal.
NOTE
Left and right side 30K winch catwalks are
removed the same way. Left side shown.
(1) Open catwalk (1) to gain access.
NOTE
Step (2) requires the aid of an assistant.
(2) Remove three self-locking nuts (2), and screws (3) from
hinge (4). Discard self-locking nuts.
(14-11 Blank)/14-12
Change 1
