TM 9-2320-366-20-4
(8) Install suspension compression plate (13) on suspension
compression plate stud (14) with spring pin (15).
(9) Install terminal lug TL44 (16) on 100 amp reverse
polarity relay 24 vdc terminal (17) with lockwasher (18)
and nut (19).
(10) Position dust boot (20) on terminal lug TL44 (16).
(11) Position intake air cleaner boot (21) on intake air cleaner
housing (22) with clamp (23).
(12) Position air compressor intake hose (24) on intake air
cleaner boot (21) with clamp (25).
(13) Tighten clamps (23 and 25) to 36-48 lb-in. (4-5 Nm).
(14) Lower cab (TM 9-2320-365-10).
7-641
