TM 9-2320-366-20-4
7-111. M1089 HOIST DOWN SOLENOID CABLE REPLACEMENT (CONT)
b. Installation.
(1) Install hoist down solenoid cable (1) through
compression nut (2), washer (3), and connector (4).
(2) Install compression nut (2) on connector (4).
(3) Install quick disconnect terminal (5) on black wire (6).
(4) Install terminal lug (7) on white wire (8).
(5) Install quick disconnect terminal (5) on ground strip (9)
position 12.
(6) Install terminal lug (7) on terminal block (10) position 16
with screw (11).
(7) Apply varnish to quick disconnect terminal (5) and
terminal lug (7).
7-560
