TM 9-2320-366-20-4
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape (Item
Batteries disconnected (para 7-57).
20, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Varnish, Oil (Item 70, Appendix D)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Tool Kit, Electrical (Item 45, Appendix C)
a. Removal.
NOTE
Remove plastic cable ties as required.
(1) Disconnect connector (1) from telescope in solenoid (2).
(2) Loosen four screws (3) on junction box (4).
(3) Open cover (5) on junction box (4).
