TM 9-2320-272-24-4
Remove six screws (16), spacer plate (15), seal (14), hinge (13), and seal (12) from frame (7). Discard
1.
seals (12) and (14).
Remove eighteen nuts (28), screws (11), and two retainers (4) from outer panel (10), frame (7). and
2.
seal (3).
NOTE
Assistant will help with step 3.
Remove seventeen rivets (9) and outer panel (10) from frame (7). Discard rivets (9).
3.
Remove twenty-four rivets (27), intake assembly (17), intake panel (26) (if present), and preformed
4.
cork (1) from inner panel (2). Discard rivets (27) and cork (1).
Remove fourteen rivets (21), two channels (20), channel seals (19), and channels (18) from intake
5.
assembly (17). Discard rivets (21) and channel seals (19).
Remove ten rivets (22), two channels (23), channel seals (24), and channels (25) from intake
6.
assembly (17). Discard rivets (22) and channel seals (24).
Remove seven nuts (5), screws (8), retainer (6), and seal (3) from frame (7). Discard seal (3).
7.
NOTE
Assistant will help with step 9.
Remove thirty-three rivets (29), two rivets (30), and inner panel (2) from frame (7). Discard
8.
rivets (29) and (30).
5-556
