TM 9-2320-272-24-4
5-87. BONNET DOOR MAINTENANCE
THIS TASK COVERS:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning and Inspection
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M934/A1/A2
TM 9-2320-272-10
TM 9-2320-273-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Rivet gun
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Channel seals (as required) (Appendix D,
Item 623)
Forty-eight rivets (Appendix D, Item 547)
Fifty-two rivets (Appendix D, Item 551)
Seal, 78 in. (Appendix D, Item 605)
Seal, 24 in. (Appendix D, Item 605)
Seal, 27 in. (Appendix D, Item 633)
Cork (Appendix C, Item 24)
Primer (Appendix C, Item 57)
Sealing compound (Appendix C, Item 67)
NOTE
Left and right bonnet doors are replaced the same way. This
procedure covers the left side.
1.
Remove two screws (4) and washers (5) from bonnet door (3) and bonnet (1).
NOTE
Assistant will help with step 2.
2.
Remove seven screws (2) and bonnet door (3) from bonnet (1).
3.
Position bonnet door (3) squarely on four jack stands with outer panel facing upwards.
5-554
