TM 9-2320-272-24-4
5-74. REAR WALL INTERIOR PANELS REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
EQUIPMENT CONDlTlON
APPLICABLE MODELS
l Parking brake set (TM 9-2320-272-10).
M934/A1/A2
l Rear doors opened (TM 9-2320-272-10).
TOOLS
l Van body sides fully expanded and secured
(TM 9-2320-272-10).
General mechanic's tool kit (Appendix E, Item 1)
l Inside telephone jack post removed (para. 3-374).
MATERIALS/PARTS
l Blackout light switch removed (para. 3-373).
l Fire extinguisher bracket removed (para. 3-416).
Sealing compound (Appendix C, Item 67)
. Electrical load center removed (para. 4-161).
REFERENCES (TM)
l Electrical junction box removed (para. 4-163).
l Converter outlet box removed (para. 4-169).
TM 9-2320-272-10
l Heater thermostat removed (para. 4-165).
TM 9-2320-272-24P
SPECIAL ENVIRONMENTAL CONDlTlONS
Vehicle must be on a level surface.
NOTE
Rear wall exterior panels are not serviceable and if damaged
l
are replaced as a unit with rear wall assembly.
Left and right rear wall interior panels are replaced the same
l
way. This procedure is for the left rear wall interior panel.
NOTE
Assistant will help with step 2.
1.
Remove thirteen screws (4) and molding (1) from panel (2) and header (3).
2.
Remove twenty-two screws (5) and panel (2) from header (3).
3.
Remove eight screws (9) and two gussets (8) from skin (7) and underframe (6).
NOTE
Apply sealing compound to exterior joints prior to installation.
l
Assistant will help with step 2.
l
1.
Install two gussets (8) on skin (7) and underframe (6) with eight screws (9).
2.
Install panel (2) on header (3) with twenty-two screws (5).
3.
Install molding (1) on panel (2) and header (3) with thirteen screws (4).
5-498
