TM 9-2320-272-24-4
5-19. FUEL INJECTOR REPAIR (Contd)
d. Non-Top Stop Injector Assembly
CAUTION
Injector barrel and plunger are a matched pair (class fit). Do not
l
interchange.
l Do not touch internal parts unless hands are clean and
moistened with diesel fuel. Failure to do so may result in
damage to internal parts.
1.
Place new check ball (6) in palm of hand and scoop up into injector barrel (4).
2.
Place injector barrel (4) flat on clean cloth so mating surface faces upward and align spiral pins (7)
with holes in adapter (5)
3.
Place adapter (5) on injector barrel (4) and hold together. Set adapter (5) upright on clean cloth.
4.
Position new injector cup (9) on top of injector barrel (4) and screw cup retainer (8) onto adapter (5).
Finger tighten cup retainer (8), and back off 1/4 turn.
5-129
