TM 9-2320-272-24-3
4-228. DEEPWATER FORDING REGULATOR VALVE REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE/MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Hood raised and secured (TM 9-2320-272-10).
Antiseize tape (Appendix C, Item 72)
Air reservoirs drained (TM 9-2320-272-10).
GENERAL SAFETY INSTRUCTIONS
Do not disconnect air lines before draining air
reservoir.
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity causing
injury to personnel.
1.
Disconnect supply hose (7) from regulator valve (6).
2.
Remove air line (4) and adapter (3) from tee (2).
3.
Remove regulator valve (6), nipple (5), tee (2), elbow (l), and reducer (9) from air horn solenoid (8).
NOTE
All male threads must be wrapped with antiseize tape before
installation.
1.
Install reducer (9), elbow (1), tee (2). nipple (5), and regulator valve (6) on air horn solenoid (8).
2.
Install air line (4) and adapter (3) on tee (2).
3.
Connect supply hose (7) to regulator valve (6).
4-1040
