TM 9-2320-272-24-3
8.
Clean wheel (10) and inspect for cracks and damaged roller surface, Discard if cracked or roller
surface is damaged.
9.
Inspect bearing (11) for chips, cracks, and damaged cage. Discard if chipped, cracked, or cage is
damaged.
Clean thrust washer (12) and inspect for cracks and wear. Measure thickness. Discard if cracked or
10.
thickness is less than 0.058 in. (1.47 mm).
11.
Clean axle (13) and inspect for cracks and scoring. Discard if cracked or scored.
12.
Clean screw (18) and inspect for cracks, scoring, and damaged threads. Discard if cracked, scored, or
threads are damaged.
13.
Clean two thrust washers (14) and inspect for cracks and wear. Measure thickness. Discard if
cracked or thickness is less than 0.058 in. (1.47 mm).
Clean sheave (17) and inspect for cracks. Discard if cracked.
14.
15.
Clean sleeve (16) and inspect for cracks and scoring. Discard if cracked or scored.
16.
Inspect bearing (15) for chips, cracks, and damaged cage. Discard if chipped, cracked, or cage is
damaged.
4-837
