TM 9-2320-272-24-3
4-169. 400 HZ CONVERTER REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
MANUAL REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
M934/A1/A2
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
l Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Battery ground cables disconnected (para. 3-126).
l
Two lockwashers (Appendix D, Item 390)
Two locknuts (Appendix D, Item 312)
Gasket (Appendix D, Item 211)
a. Removal
1.
Remove
four screws (1), cover (2), and gasket (3) from converter (4). Discard gasket (3).
2.
Remove
six nuts (9) and wires (10) from converter (4).
3.
Remove
two lockwashers (8) and wiring harnesses (6) and (7) from converter (4).
4.
Remove
four nuts (17), washers (18), and screws (11) from support bracket (5).
5.
Remove
converter (4) from support bracket (5).
6.
Remove
two locknuts (19), U-bolt (15), and nuts (16) from support bracket (5). Discard locknuts (19).
7.
Remove
four nuts (13), screws (14), and support bracket (5) from van body (12).
b. Installation
1.
Install
support bracket (5) on van body (12) with four screws (14) and nuts (13).
2.
Install
two nuts (16) and U-bolt (15) on support bracket (5) with and new locknuts (19).
3.
Install
converter (4) on support bracket (5) with four screws (11), washers (18), and nuts (17).
4.
Install
two wiring harnesses (6) and (7) on converter (4) with two new lockwashers (8).
5.
Install
six wires (10) on converter (4) with six nuts (9).
6.
Install
gasket (3) and cover (2) on converter (4) with four screws (1).
4-804
