TM 9-2320-272-24-3
4-156. HEATER FUEL PUMP WIRING HARNESS MAINTENANCE
THIS TASK COVERS:
c. Installation
a. Removal
b. Repair
INITIAL SETUP:
APPLICABLE MODELS
MANUAL REFERENCES (TM)
M934/A1/A2
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
l Parking brake set (TM 9-2320-272-10).
l Battery ground cables disconnected (para. 3-126).
a. Removal
NOTE
Perform step 1 on M934 vehicles only.
Tag wires for installation.
Remove screw (1) and clamp (5) from fuel pump wiring harness (3).
1.
2.
Disconnect wiring harness (3) from fuel pump connector plug (2).
3.
Disconnect wiring harness (3) from heater (6).
4.
Remove wiring harness (3) from van body (4).
b. Repair
For van wiring harness repair, refer to para. 3-131.
c. Installation
1.
Position wiring harness (3) on van body (4).
2.
Connect wiring harness (3) to heater (6).
3.
Connect wiring harness (3) to fuel pump connector plug (2).
NOTE
Perform step 4 on M934 vehicles only.
4.
Install clamp (5) on wiring harness (3) with screw (1).
4-766
