TM 9-2320-272-24-3
4-117. STEERING GEAR (ROSS) AND MOUNTING BRACKET REPLACEMENT (Contd)
NOTE
Assistant will help with steps 1 and 2.
1.
Install mounting bracket (3) on left frame rail (3) with four screws (7) and new locknuts (9). Do not
tighten locknuts (9).
Install mounting plate (4) and steering gear (5) on left frame rail (8) with four screws (6), washers (2),
2.
and nuts (1). Tighten nuts (1) 260-280 left (353-380 Nm).
Tighten locknuts (9) 69-70 lb-ft (81-95 Nm).
3.
NOTE
Wrap male pipe threads with antiseize tape before installation.
4.
Install new O-rings (12), (15), and (20), adapter elbows (10) and (18), and adapters (13) and (16) on
steering gear housing (5).
5.
Connect assist cylinder pressure lines (17) and (19) to adapter elbow (18) and adapter (16).
6.
Connect oil return line (14) and oil pressure line (11) to steering gear housing adapter (13) and
adapter elbow (10).
4-616
