TM 9-2320-272-24-3
4-67. FRONT WIRING HARNESS (M939A2) REPLACEMENT (Contd)
75.
Install wire (50) on alternator (42) with new lockwasher (45) and nut (46).
76.
Install wire (55) on alternator (42) with new lockwasher (43) and nut (44).
77.
Install wire (54) on alternator (42) with new lockwasher (53) and screw (52).
78.
Connect wire (51) to connector (49).
NOTE
Apply sealing compound to terminal cover and wires for
installation.
79.
Install
terminal cover (47) on alternator (42) with two new screw-assembled lockwashers (48).
80.
Install
wires (37) and (38) on starter (39) with new lockwasher (36) and nut (35).
81.
Install
wire (34) on starter (39) with new lockwasher (40) and nut (41).
82.
Install
wire (30) and battery cable (33) on solenoid (26) with new lockwasher (31) and nut (32).
83.
Install
wire (27) on solenoid (26) with new lockwasher (26) and nut (29).
FOLLOW-ON TASKS:
Install air intake pipe (para. 3-14).
l
Connect main light switch (para. 3-108).
l
Connect failsafe wiring module (para. 3-106).
l
Install turn signal flasher (para. 3-114).
l
Install protective control box (para. 3-115).
l
Install splash shields (TM 9-2320-272-10).
l
4-445
