TM 9-2320-272-24-2
4-12. CYLINDER HEAD REPLACEMENT (Contd)
b. Installation
CAUTION
If old cylinder head is being installed, ensure it is installed in the
same location.
NOTE
Assistant will help with steps 1 and 2.
1.
Install new cylinder head gasket (5) on cylinder block (1). Ensure the word TOP is facing up.
2.
Install cylinder head (4) on cylinder block (1) with twelve washers (3) and screws (2). Tighten
screws (2) 25 lb-ft (34 N-m) in sequence shown.
3.
Tighten screws (2) 80-100 lb-ft (109-136 Nm) in sequence shown.
4.
Tighten screws (2) 180-200 lb-ft (244-271 Nm) in sequence shown.
5.
Tighten screws (2) 280-300 lb-ft (380-407 Nm) in sequence shown.
4-122
