TM 9-2320-272-24-2
4. Remove three screw-assembled lockwashers (1) and starter (2) from flywheel housing (3). Discard
screw-assembled lockwashers (1).
5. Remove gasket (6), spacer (5), and gasket (4) from flywheel housing (3). Discard gaskets (6) and (4)
and clean remains of gaskets (6) and (4) from mating surfaces.
6. Remove locknut (15), washer (16), screw (19), and washer (18) from power steering pump bracket (10)
and adjustable link (17). Discard locknut (15).
7. Remove two screws (13), lockwashers (12), and washers (11) from power steering pump bracket (10).
8. Remove two drivebelts (7) from pulley (8).
9. Remove power steering pump bracket ( 10) and power steering pump (9) from engine bracket (14).
10. Remove four screws (24), lockwashers (25), washers (23), engine access cover (22), and gasket (21)
from engine block (20). Discard lockwashers (25) and gasket (21) and clean remains of gasket (21)
from mating surfaces.
11. Remove screw (30), lockwasher (31), and breather tube mounting bracket (29) from engine block (20).
Discard lockwasher (31).
12. Loosen hose clamp (27) and remove breather tube (26) from breather hose (28).
NOTE
Perform step 14 for late model engines only.
13. Loosen hose clamps (33) and (35) and remove breather tube (34) from breather (32) and elbow (36).
4-102