TM 9-2320-272-24-2
Start and idle engine at 800-1,000 rpm for 5-10 minutes, observing oil pressure (TM 9-2320-272-10).
7.
Reset throttle and proceed to step 14.
CAUTION
If oil pressure drops below 10 psi (68 kPa), or rises sharply
above 30 psi (207 kPa), stop engine and correct as required.
Stop engine and inspect coolant and oil levels (TM 9-2320-272-10).
8.
Inspect engine for leaks (TM 9-2320-272-10).
9.
Start and run engine at 1/4-1/2 throttle until water temperature gauge (2) reaches 165-195F
10.
(73-90C).
11.
Stop engine and inspect coolant and oil levels (TM 9-2320-272-10).
12.
Inspect engine for leaks (TM 9-2320-272-10).
Start and idle engine at 800-1,000 rpm as indicated on tachometer (1) for 5-10 minutes, observing
13.
oil pressure gauge (3) for proper range (TM 9-2320-272-10).
4-97
