TM 9-2320-272-24-2
4-4. POWER PLANT (M939/A1) REPLACEMENT (Contd)
Disconnect breather vent line (3) from adapter elbow (2). Tie breather vent line (3) clear of
48.
transmission (1).
Remove two locknuts (5), U-bolt (7), and shim (6) from support bracket (4) and cable (8). Discard
49.
locknuts (5).
Remove cotter pin (10) and cable pin (9) from shift lever (11). Discard cotter pin (10) and tie
50.
cable (8) clear of transmission (1).
Disconnect wire (13) to 5th gear lock-in solenoid (14) from connector (15). Tie wire (13) to
51.
transmission (1).
Disconnect transorb diode wire (12) from connector (15).
52.
Remove nut (18), screw (27), clamps (17) and (26), modulator cable (16), and speedometer
53.
cable (25) from transmission bracket (19). Tie modulator cable (16) and speedometer cable (25) clear
of transmission (1).
Remove screw (22), bracket (21), modulator (24), and O-ring (23) from transmission (1). Discard
54.
O-ring (23).
Remove screw (20) and bracket (19) from transmission (1).
55.
Disconnect two wires (28) from neutral start switch (29). Tie wires (28) clear of transmission (1).
56.
4-46
