TM 9-2320-272-24-2
4-4. POWER PLANT (M939/A1) REPLACEMENT (Contd)
NOTE
Access for steps 43 through 45 is through door in cab floor.
Disconnect wire (17) from transmission oil temperature sending unit (23). Tie wire (17) clear of
43.
transmission.
44.
Disconnect wires (17) and (20) from two clips (18) on transmission flange (19). Tie wires (17) and (20)
clear of transmission.
45.
Remove transmission dipstick (22) from tube (21). Plug opening in tube (21).
NOTE
Perform step 46 and 47 only on vehicles equipped with a
transmission Power Takeoff (PTO).
46.
Remove two nuts (24), screws (28), retaining strap (27), and spacer plate (26) from PTO cable (29)
and bracket (25).
47.
Remove cotter pin (33), washer (32), cable pin (30), and PTO cable (29) from PTO select lever (31).
Discard cotter pin (33), and tie PTO cable (29) clear of transmission.
4-45