TM 9-2320-272-24-2
30.
Install four ammo tray supports (11) and ammo box tray (9) on left and right front sides of support
assembly (10) with eight washers (12), screws (1), washers (8), and new locknuts (7). Do not tighten
locknuts (7).
31.
Install four braces (4) to support assembly (10) with four washers (3), screws (2), washers (5), and
new locknuts (6). Do not tighten locknuts (6).
32.
Tighten locknuts (7) and (6).
33.
Tighten locknuts, installed in subtask c., connecting four ammo tray supports (11) and four braces (4)
to two ammo box trays (9).
3-1184
