TM 9-2320-272-24-2
3-427. 100-AMP ALTERNATOR HARNESS REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INlTlAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDlTlON
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Hood raised and secured (TM 9-2320-272-10).
Left and right splash shields removed
Five tiedown straps (Appendix D, Item 696)
Two lockwashers (Appendix D, Item 379)
(TM 9-2320-272-10).
Battery ground cables disconnected (para. 3-126).
Lockwasher (Appendix D, item 416)
a. Removal
NOTE
Tag wires, connectors, and cables for installation.
1.
Remove three screws (6), washers (5), and clamps (4) from firewall (2), front wiring harness (22),
and voltage regulator wiring harness (3).
2.
Remove four tiedown straps (7) from front wiring harness (22) and voltage regulator wiring
harness (3). Discard tiedown straps (7).
3.
Remove two nuts (18), washers (17), and clamps (16) from personnel heater (1).
4.
Remove tiedown strap (15) from wiring harness (10). Discard tiedown strap (15).
5.
Disconnect harness connector (8) from alternator (9).
6.
Disconnect connectors (12) and (13) from wires (11) and (14).
7.
Disconnect harness connectors (19) and (21) from regulator (20).
3-1096
