TM 9-2320-272-24-2
3-417. CHEMICAL AGENT ALARM MOUNTING BRACKET KIT REPLACEMENT
THIS TASK COVERS:
a C h e m i c a l A l a r m W i r i n g H a r n e s s R e m o v a l c . Detector and Alarm Bracket Installation
b. Detector and Alarm Bracket Removal
d. Chemical Alarm Wiring Harness Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Hood raised and secured (TM 9-2320-272-10).
Six locknuts (Appendix D, Item 299)
Battery ground cables disconnected (para. 3-126).
Lockwasher (Appendix D, Item 353)
Driver's seat removed (para. 3-283).
Electrical tape (Appendix C, Item 73)
a. Chemical Alarm Wiring Harness Removal
NOTE
The cable is provided in two sections. A short wire harness with a
screw-on receptacle completes the circuit for the detector and
alarm units to the main power source. This harness is only
supplied when both chemical detector and alarm units are issued
to the field.
1.
Remove nut (4) and receptacle (1) from detector bracket (3).
Remove screw (6), clamp (7), and cable (2) from locations A, B, C, D, E, and F along left side fender (5)
2.
and underside of vehicle.
3.
Remove six clamps (7) from cable (2).
3-1058
