TM 9-2320-272-24-2
26.
Disconnect wire (1) from wire (4) on frame crossmember (3).
27.
Remove two tiedown straps (8) from lines (9) and (7). Discard tiedown straps (8).
28.
Remove line (7) from elbow (5).
29.
Remove tube (2) from elbow (6).
30.
Remove elbows (5) and (6) from tee (11).
31.
Remove tee (11) from air compressor (10).
32.
Remove tube (2) from frame crossmember (3).
NOTE
Clean all male pipe threads and wrap with antiseize tape before
installation.
1.
Install tube (2) on frame crossmember (3).
2.
Install tee (11) on air compressor (10).
3.
Install elbows (5) and (6) on tee (11).
4.
Install tube (2) on elbow (6).
5.
Install line (7) on elbow (5).
6.
Install two new tiedown straps (8) on lines (9) and (7).
7.
Connect wire (1) to wire (4) on frame crossmember (3).
3-1026
