TM 9-2320-272-24-2
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Batteries removed (para. 3-125).
Antiseize tape (Appendix C, Item 72)
1.
Loosen two hose clamps (2) and remove inlet hose (4) and outlet hose (3) from swingtire heater
pad (1) and adapter (5).
2.
Remove adapter (5) from elbow (6).
NOTE
Mark position of elbow for installation.
3.
Remove elbow (6) and nipple (11) from swingfire heater pad (1).
4.
Remove swingfire heater pad (1), two blocks (10), four blocks (8), and two blocks (9) from battery
box (7).
NOTE
Wrap all male pipe threads with antiseize tape before installation.
1.
Position two blocks (9), four blocks (8), two blocks (10), and swingfire heater pad (1) in battery box (7).
2.
Install nipple (11) and elbow (6) on swingfire heater pad (1).
3.
Install adapter (5) on elbow (6).
4.
Install inlet hose (4) and outlet hose (3) on swingfire heater pad (1) and adapter (5) and tighten two
hose clamps (2).
3-1018