TM 9-2320-272-24-2
3-406. SWINGFIRE HEATER AND MOUNTING BRACKET REPLACEMENT (Contd)
b. Installation
Install two turnbuttons (4) on bracket (7) with two new lockwashers (8) and nuts (9).
1.
Install six turnbuttons (4) on right front fender (18) with six new lockwashers (8) and nuts (9).
2.
Install three turnbuttons (22) on right front fender (18).
3.
Install bracket (7) on right front fender (18) with two screws (6). washers (10), and new
4.
locknuts (11).
Install bracket (20) on right front fender (18) with four screws (19), washers (14). and
5.
new locknuts (15).
Install cover (23) on right front fender (18) and bracket (7) with three screws (5), new lockwashers (2),
6.
and nuts (3).
Secure cover (23) to right front fender (18) and bracket (7) with six screws (1), new lockwashers (12),
7.
and nuts (13).
Install swingfire heater (21) on bracket (7).
8.
Install clamp (17) on bracket (7).
9.
Close clamp (16) on bracket (20).
10.
Position cover (23) over swingfire heater (21) and install on right front fender (18) with three
11.
turnbuttons (22) and eight turnbuttons (4).
3-1002
