TM 9-2320-272-24-2
3-376. SIDE AND REAR DOOR BLACKOUT LIGHT SWITCH MAINTENANCE
THIS TASK COVERS:
c. Adjustment
a. Removal
b. Installation
REFERENCES (TM)
APPLICABLE MODEL
TM 9-2320-272-10
M934/A1/A2
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10)
MATERIALS/PARTS
Main power switch off (TM 9-2320-272-10).
Van body side panel fully expanded and secured
Solder (Appendix C, Item 70)
(TM 9-2320-272-10).
1.
Remove two screws (4) and blackout light switch (2) from electrical panel (8) or switch box (1).
2.
Remove solder from terminals of blackout light switch (2) and disconnect two wires (7).
1.
Connect two wires (7) to terminals of blackout light switch (2) and install with solder.
2.
Install blackout light switch (2) on electrical panel (8) or switch box (1) with two screws (4).
NOTE
With main power switch, interior lights, and blackout light circuit
on, interior lights must turn off when door starts to open, and turn
on when door is closed.
1.
Remove blackout light switch (2) (task a.).
2.
Remove nut (5) and plate (6) from blackout light switch (2).
Rotate ring (3) down farther on threaded shaft of blackout light switch (2).
3.
4.
Install plate (6) on blackout light switch (2) with nut (5).
5.
Install blackout light switch (2) (task b.).
3-922
